1 Name: Matt Ford Model: Focus Ford Year: 2013 UK/Ireland Location: Greater London Posted January 17, 2021 Hi, my Focus has started getting the engine malfunction service now on most journeys, this will occur within about 10 minutes of starting the car, always when slowing down at low revs, for example when approaching a junction. Posted July 2, 2017. resetting a service message relating to oil change is done by switching ign on then pressing brake and accelerator pedals down together and holding down until message say reset (or message dissapears on some newer vehicles) 4. Quote. Ford Model: Focus ST3 225 MK2 moded 340 BHP Ford Year: 2007 Ford Model: Ford Focus Ecoboost (1.0 petrol 125bhp) Ford Year: 2012 UK/Ireland Location: Armagh If the vehicle battery is replaced, it is very important to perform the battery monitoring system reset . If the battery monitoring system reset is not carried out, it holds the old battery parameters and time in service counter in memory. Additionally it tells the system the battery is in an aged state and the (sic) may limit the Electrical 4. Name: Ron. Ford Model: Focus. Ford Year: 2014. UK/Ireland Location: Devon. Posted May 20, 2015. I own a 2014 Focus Zetec Turbo (1 litre ecoboost,115) since July 2014 and for some reason the automatic start/stop is so intermittent it has become very frustrating. It has been back to the garage (approved repairer) 3 times and it is still not . Ford. Issue: Some 2018-2020 EcoSport vehicles equipped with a 1.0L EcoBoost engine may exhibit a reoccurring illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB. This may be due to the software in the powertrain control module (PCM). To correct the condition, follow the Service Procedure to reprogram the PCM. Procedure to re set the service reminder on a 2017 Ford Focus 1.0 ecoboost.It's the same procedure for most of the Ford vehicles around this age, hope this h Can we save the 1.0 ecoboost engine having suffered low oil pressure due to the wetbelt (cam belt) failing and blocking the oil pump. Or is it a new engin My Ford Fiesta Zetec S 1.0 ecoboost is losing power whilst accelerating. No lights are appearing on the dash, we’ve checked a pipe from the intercooler and changed as was split (we thought it was sensing the heating up of the engine/turbo to be falsely overheating) that worked temporarily. LTFT going as high as +13..15% at idle some while on my 125PS 1.0 Focus 3 Facelift Ecoboost after doing a "reset all adaptations" using Forscan Ford Focus MK 2 1

ford focus 1.0 ecoboost service reset